Tekst źródłowy strony LK2Manual en

==LAN Controller V2.0==
Firmware:
HOME: from 3.13
ISP: from 2.09

'''LAN Controller V2 '''  is a simple, but innovative device which has long been lacking in the market
network solutions. A small board serves as a web server which presents the various
sensor readings and allows you to remotely control up to 6 outputs. For far rom socket
installation board could be powered by passive PoE. In order to expand the uses of our
Lan Controller we introduced two types of management software (firmware) suitable for
different applications. In both versions, in addition to the main page of the Control Panel
from the sensor readings are tabs: Events Config for programming an array of events,
Scheduler for programming timed events and the Network Config for all other settings.
Differences (described further below) between firmware versions are as follows: 2.XX - ISP
version - contains an additional tab to set Watchdog to monitor 5-five network devices.
3.XX - Home edition - is devoid of tabs Watchdog, but have been added: supports sensor
DHT22, reading to 6 temperature probes DS18B20, working digital inputs as bistable
switches - to use wall light switches. Changing the firmware is possible by the user program
LAN Controller Tools.exe (Windows XP) or via the TFTP protocol - as described in this
manual at p. 25. In Accessory (www.tinycontrol.eu) are presented all sensors and upgrade
kits compatible with Lan Controller.

==Examples of applications==
'''ISP'''

*watchdog function to checking TCP/IP connection and launch outputs if hanging happen
*temperature, supply voltage and person occupancy control in server rooms
* weather condition report on the occasion of IP cameras views

'''Home control'''
* home electric stove control (automatically or remote)
*turning on/off home lightening remote, by scheduler or by event, controlling intensity
*turning off TV box if remote is other person hands ;-)
*irrigation control - you don’t need visit your garage to modify irrigation time or you can turn sprayer precisely in the moment when your favorite neighbor passes near ;-)

'''Home installations'''
* temperature controlling and simple automation in your heating system
* temperature and pressure controlling in solar thermal installations
* measurements of heat pump operation
* monitoring of grid voltage and automatic switching to backup with mail notification
* remote control (by LAN or wirelesslan) understands as forwarding command to one of
output of Lan controller from input of other Lan controller
'''Renewable energy'''
* measurements of solar cells work
* measurements of wind turbines
* measurements of charging battery
* measurements of power consuming
'''Agriculture'''
* Irigation systems
* Animal food processing automatization

'''RESTARTER, MONITOR, CONTROLLER'''

====FEATURES: (may vary depending on the firmware version):====
* WWW or SNMP v2 management
* firmware upgrade via TFTP
* read data in real time without refreshing page
* possibility switch on/off to 5 relay direct and 1 transistor output up to 1A from page
'''WWW'''
* events panel to self-programming by user
* Scheduler (switch on/off output for definite time in week days)
* IP watchdog to five IP device (only v. 2.09)
* monitoring additional devices eg. PIR sensors
* environmental temperature and supply voltage on board measurement
* temperature and current measurement from connected sensors
* temperature and humidity measurement by DTH22 sensor (only v. 3.13)
* power measurement for DC voltage
* power measurement from grid by elecricity meterer impulse (only v. 3.13)
* possibility to connecting of the additional boards: with 4 switched PoE ports or 4 relays
* set time manualy or by server NTP
* posisibility sensors calibration
* frequency and duty modified PWM output
* remote control: each output of Lan controller setup as server can be controlled remotelly by LAN network from inputs of others Lan controllers
* e-mail notification about programmed events
* SNMP TRAP notification about programmed events
* automaticaly send state or value inputs to SNMP server by POST or GET commands
* implemented protocols: HTTP, SNMP, SMTP, SNTP, ICMP, DNS, DHCP.
* supported temperature sensors: PT1000, DS18B20
* support 1wire protocol

We hope that the LAN controller will have new applications not only in the ISP networks,
but most of all as a simple home automation, control the status of any type of installation,
the measurement of renewable energy sources or as a simple measure of the energy
consumption of the various receivers. Therefore, the range of sensors will be expanded to
implement such measurements.

We invite you to visit our website
www.tinycontrol.eu

There you will find the firmware updates
and information about the new possibilities.
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
www.tinycontrol.eu
==FACTORY SETTINGS==
*IP address of the module: 192.168.1.100
*user: admin
*password: admin

==TECHNICAL SPECIFICATIONS==
* supply voltage: 8÷28 V DC
* power consumption : about 1W
* PoE supply: YES, passive (PoE max. <28V)
* Protection from wrong supply polarization: YES
* interface: ethernet 10Mbit/s
* relay: 255VAC 10A
* operating temperature: –20 to +85 °C
* weight: 50g
* dimensions (in a housing without plugs) 66 x 68 x 40 mm

==INPUT/OUTPUT:==

* 5 ANALOG INPUTS: temperature, voltage, current (by additional boards) and another physics measurements
* DIGITAL INPUT for 1WIRE bus (connector RJ11): support for 4 (v. 2.09) or 6 (v. 3.13) temperature sensors DS18B20
* DIGITAL INPUT: support temperature and humidity sensor DHT22 (only v. 3.13)
* 4 LOGICAL INPUTS:for monitoring, as a pulse counter from energy meter (only v. 3.13)
* 1 RELAY OUTPUT: (NO, NC, C)
* 1 TRANSISTOR OUTPUT: up to 1A
* 4 OUTPUTS (Connector IDC10-1): to switch relays or transistors
* 4 PWM OUTPUT: 2,6 KHz do 4 MHz
* measuring the temperature and supply voltage LAN Controller board
* reverse polarization protection

===PINS and COMPONENTS DESCRIPTION===


* Temp. board sensor
* Ethernet
* 10Mbit.
* PoE max 28V
* IDC10-1
* INP3D
* INP4D
* GND
* INP1 - U 0÷7,2 V
INP2 - U 0÷36 V
INP3 - PT1000
GND
OUT5=Usupply
GND
NC
C
NO
Power
max 28V
power LED
relay LED
INP6 - RJ11-
bus
1-Wire for
DS18B20
RELAY OUT0
INP1D
INP2D
jumper pins
IDC10-2
RESET
green LED
orange LED
PIN / Component Description
Power Power supply 8V ÷ 28V DC
power LED Shine LED means power on board
relay LED Shine means relay active
green LED Shine LED means eth link active
orange LED Shine means data transmitted
IDC10-1 Additional outputs, for example, relays
IDC10-2 Additional Inputs / Outputs PWM1÷3
INP1÷4D Logical inputs Low=0~0,8V, High=0,8V~20V
INP4D Also supports a pulse counter (only v. 3.13)
INP1 Input for voltage measure 0 ÷ 7.2V (3.6V if jumper on)
INP2 Input for voltage meas. 0 ÷ 36V
INP3 Input for PT1000 sensor for high temp. measure
GND General ground
OUT5 Transistor output (+), voltage = power supply, max 1A
GND Ground for transistor output (–)
NC Relay OUT0, normally closed contact
C Relay OUT0, common contact
NO Relay OUT0, normally open contact
}
digital
inputs
6
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
www.tinycontrol.eu
RELAY BOND:
 NC – contact normaly closed
 C – common contact
 NO – contact normaly open
ATTENTION: In spite of that relay can switch AC voltage 255 VAC 10A, board fail to comply
with safety requirements (lack housing, earthing). Therefore that receiver connect
with the assistance safety external relays eg. on DIN bus, controlled by relay on board.
IDC10-1, IDC10-2 and RJ11 (bus 1-WIRE):
RESET BUTTON
Pressing for about 0.5 seconds to change state relays, and withstand longer to near 5 seconds
(when we’re not logged by the Web module) will reset the module, further detention
for about 10 seconds to change all settings (both network and configuration ) on the
factory, reset confirmation of the settings is fast switching on and off the relay (click-click),
not to be confused with the change of status and exclusion of the relay after a reboot.
User and password: admin
IP: 192.168.1.100
ETHERNET
10 Mbit
PoE max 28 V
max 28 V
POWER
not
use
GND 1-Wire VCC=3.6V RESET
IDC10-1
9 – VCC
7 – PWM
5 – GND
3 – +3,6 V
1 –
OUT1–10
OUT2 – 8
OUT3 – 6
OUT4 – 4
– 2
IDC10-2
9 – VCC
7 – INP4
5 – GND
3 – +3,6 V
1 – DHT22
INP5 –10
– 8
PWM2 – 6
PWM3 – 4
PWM1 – 2 (only v. 3.13)
NO C NC
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
7
www.tinycontrol.eu
SENSORS CONNECT
1. Voltage measurement
INP2
INP1
GND
Measure voltage:
0 ÷ 7.2 V DC
(multiplier 2.0) or
0 ÷ 3.6 V DC
after using jumper
and adjusting the
multiplier (multiplier
1.0)
Measure voltage:
0 ÷ 36 V DC
jumper
multiplier
GND
GND – Pin5
Vcc – Pin3
OUT – Pin7
FAULT
Recommended
installation of cables
2. Connecting the current sensor ACS711ex
IP+
IP–
IDC10-1
IDC10-2
8
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
www.tinycontrol.eu
Recommended
installation of cables
GND – Pin5
Vcc – Pin3
OUT – Pin7
3. Connecting the current sensor ACS709
IP+
IP–
4. Connecting the sensor LA100-P
– +
72 Ω
INP4
Vcc – Pin9 (12V)
GND – Pin5
IDC10-1
IDC10-2
IDC10-1
IDC10-2
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
9
www.tinycontrol.eu
5. Voltage connections to INP5 using a resistive divider
R1
R1
U
U = U1 + U2
U
=
R2
R2
U1
U1
U2
U2
R1 + R2
= R2 U2
R1
U
U2 R2
GND – Pin5
INP5 – Pin10
EXAMPLE
U – Input voltage for the measurement
U2 – the voltage at the input INP5 (max. 3.6 V)
for the measurement of up to 36 V, use the divider:
R1 = 9 kΩ, R2 = 1 kΩ,
for the measurement of up to 360 V, use the divider:
R1 = 99 kΩ, R2 = 1 kΩ,
As a result of sharing multiplier enter: U / U2
ACS = 0 – No Reading
ACS = 1.0 – 15A (ACS711ex)
ACS = 2.0 – 30A (ACS711ex)
ACS = 3.0 – 75A (ACS709)
ACS = 4.0 – resistor 0,1Ω
ACS = 5.0 – LA100-P (through resistor 75Ω)
multiplier
6. Set the sensor type INP4 and the value of the multiplier INP5
IDC10-1
IDC10-2
10
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
www.tinycontrol.eu
output terminals
of the meter pulse energy
for different counters
may differ markings
INP3
GND
PT1000
7. Temperature measurement
8. DHT22 sensor and pulse output from the counter (v. 3.13)
The maximum frequency of counting pulses is 10 pulses per 1 second.
+ 20 21 –
IDC10-1
IDC10-2
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
11
www.tinycontrol.eu
9. PIR motion sensor interface
INP1D÷INP4D
Vcc – Pin9 (9÷24V)
GND – Pin5
setup
operation time
delay setting after which
the loss of movement
can actuated output again
PIR
sensor
Detected
motion
Jumper
setting
Output
low state 0~0,8V
high state 0,8V~20V
IDC10-1
IDC10-2
12
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
www.tinycontrol.eu
Management by WWW.
1. Control Panel
Any description
of the measured
physical
quantity,
such as kWh,
L/min, etc.
(only v. 3.13)
Negation for
digital input
for Even Config
tripping
(only v. 3.13)
Divider pulse counter
- for example as ours
energy meter sends 1000
pulses per 1 kWh is enter
1000, as it sends 1600
pulses enter 1600, etc.
(only v. 3.13)
Change outputs
state display
Any text
description,
max 8 chars
Reset time – „0” for normal
outputs work (ON/OFF) ,
for time > 0 output change
state and return to state before
after the specified time
in seconds (max 65534).
Value of calibration
- adds to or subtracts
the desired value
Select the type of sensor
connected to the corresponding
input
click cause
change relay
state on opposite
(OUT0 relay on
board)
automatic socket
arming at fixed
time (two panes:
one - time arming,
second - break
time)
Set State
All output
simultaneously
according to
combo box
Run PWM generator
(when changing
frequency or
fill does not need
to turn off the
generator)
Run Power
measure from
INP3 (voltage)
and INP5 (current)
(only v. 3.13)
Time averaged
over
a values
of power
measurement
(in minutes)
(only v. 3.13)
only v. 3.13
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
13
www.tinycontrol.eu
The numbers of sensors:
0 – inserts 0 value, (then receive a value
from one sensor, positive or negative,
depending on which window (first or
second) enter zero, and what temp. (+ or –)
indicates a sensor)
3 – pt1000
4 – temp
6 – inp6 (DS18B20)
7 – inp7 (DS18B20)
8 – inp8 (DS18B20)
9 – inp9 (DS18B20)
10 – inp10 (DS18B20)
11 – inp11 (DS18B20)
12 – DTH22 temperature
1.1 ANALOG Inputs State (Control Panel)
Added measurement of temperature difference
with the selected temperature sensors
- the value of DIFF in the table.
(enter the numbers of temperature sensors in
the boxes - in the „DIFF” shows the difference
of their values).
NOTE: The calculation of the value of DIFF is:
[value (+ or –) temp. sensor in field 1] – [value (+ or –) temp. sensor in field 2] = DIFF
Examples:
[+25 °C] – [+5 °C] = +20 °C [+5 °C] – [+25 °C] = –20 °C
[+25 °C] – [–5 °C] = +30 °C [+5 °C] – [–25 °C] = +30 °C
[–25 °C] – [+5 °C] = –30 °C [–5 °C] – [+25 °C] = –30 °C
[–25 °C] – [–5 °C] = –20 °C [–5 °C] – [–25 °C] = +20 °C
[no sensor (typed 0)] – [+10 °C] = –10 °C
[no sensor (typed 0)] – [–10 °C] = +10 °C
[+10 °C] – [no sensor (typed 0)] = +10 °C
[–10 °C] – [no sensor (typed 0)] = –10 °C
only v. 3.13
14
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
www.tinycontrol.eu
Delay of set outputs
after occur events,
in seconds max 65535
2. Events Config
If checked it responds
to a change of state,
otherwise no reaction (off)
Email text taht
will be send if
events occurance,
max amount char
is 79. Chars „=”
and „&” are not
allowed
The hysteresis
value for
a given input.
Save setings
(ON/OFF
input
you don’t
must save)
inclusion
of an input
After exceeding
a preset value
upwards will be:
the inclusion
of an exit /
PWM generator /
send e-mail /
SNMP Trap
After crossing
the setpoint down
will be:
the inclusion
of an exit /
PWM generator /
send e-mail /
SNMP Trap
only
v. 3.13
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
15
www.tinycontrol.eu
For logical input INP1D ÷ INP4D, e-mail and SNMP Trap notification are send when input
level change from 1 to 0 or 0 to 1, additional to email text (at end) will be add value
1 or 0 mark actual input state.
Bistable operation input
- the first change at INPD to
turn on output, the second
amendment to disable output
(only v. 3.13)
If a value greater than 0,
is at work bistable output
 is automatically switched
off after this time, max 255
seconds (only v. 3.13)
Functional Description Event Table
With this change, you can flexibly define thresholds and intervals in which such slot is to
be enabled / disabled.
If you have the proper checks the condition of a number of sensors is to force the state
OUTX outputs and setting the PWM generator to be that was last registered event.
only v. 3.13
16
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
www.tinycontrol.eu
3. Scheduler
Format: number output (from 0 to 4),day1,day2,day3,day4,day5,day6, xx:xx:xx(time)
Week Day: Mo - Monday, Tu- Tuesday, We - Wednesday, Th - Thursday, Fi - Friday, Sa - Saturday,
Su - Sunday, ## - all week day. Letter size is important.
Example:
0,Mo,12:23:00 - sets out0 every Monday at 12:23:00
1,Sa;Fi,Mo,23:22:03 - sets out1 every Saturday, Friday and Monday at 23:22:03
1,Sa;Fi,Mo,Tu,Su,Th,23:22:03 - sets out1 every Saturday, Friday, Monday, Tuesday, Sunday
and Thursday at 23:22:03
0,##,12:01:30 - sets out0 every week day at 12:01:30
The effect of this may be the inclusion of a relay, switched off or reset (turn on and off) for
a limited period in seconds. (max 65535).
Allows you to
block actions
of Scheduler,
if you change
the input state
INP1D
allows you
to choose which
state INP1D
turn on
the lock
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
17
www.tinycontrol.eu
4. Network Configuration
e-mail client settings
parameter.
After changing the
settings in order to
test the customer -
should be save your
settings - the „Save
Config” button.
NOTE:
Some servers (eg. Google) require authentication outgoing mail.
Unfortunately, our device does not provide this functionality.
To send e-mail messages, select the servers that do not require it.
18
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
www.tinycontrol.eu
The user name
and password
to access the
module.
You can disable
authorization.
NTP server settings.

Time Interval -
the interval in
minutes between
synchronizations.
Fields community
(password) for
SNMP, must be
the same in your
queries in order
to LK replied.
TRAP Enable –
enabled send
TRAP by SNMP.
HTTP client settings - this is http client configuration.
This tool can easily send at specified intervals (time) value of the input or output states
on a remote server. As an example will use a free server https://www.thingspeak.com,
which allows you to show data in graphs in the timeline. To the contents of the command
to add value I/O, use the „#” and enter the number (a list of numbers p. 20).
Said sample server requires in turn give the command „GET /update?Key=” then the key
to our account (Write API key. Then, in turn attach a data field &field=#xx where xx is the
two-digit number of I/O, for example. „&Field=#05”
(NOTE! Record must be double digit, as we enter „5” to write „05”. If you need to send
data from several sensors are fields „field” separated by commas.
Maximum server name is 31 characters, the maximum string RemouteURL is 127 characters.
The time window, type frequency in seconds with which data will be sent to the server.
In the following example, and for normal queries between „GET” and „/” is a space.
Selecting Auto send and save this state will activate the function.
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
19
www.tinycontrol.eu
Enable Automatic Send TRAP – enable
automatic send TRAP by SNMP (above
TRAP Enable must be enable)
Time Interval (max value 10555) – period
to send TRAP from given INPUT,
accuracy 10 s
Time is set individually or with an NTP
server. When set manually each time you
reboot the machine need to set the time.
Output status when you turn on
or reboot the LAN Controller
Assigning an item number
for the currently connected
sensor DS18B20.
1. Connect chosen sensor (others should be removed), 2. Refresh the button „Read ID”, (if it does
not appear ID, reset Lan Controller), 3. Enter the position number and press „Save to” button.
The read ID number will be assigned to the desired position, where „1” corresponds to INP6,
„2” is INP7 ... and „6” is INP11.
To add additional sensors, proceed as described above CONNECTED WITH ONLY ONE,
CURRENTLY added SENSOR. If you want to remove the assignment, refresh the „Read ID” without sensor (so that the field
was empt) and memorize the redundant item number („Save to”).
only v. 3.13
only v. 3.13
only v. 2.09
20
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
www.tinycontrol.eu
5. Watchdog (only v. 2.09)
Time to respond is 4 seconds,
after this time if no response
one PING failure is counting.
Then if it happen, during waiting
for next respond PINGs to
other IP addresses are not realised.
It can stretch watchdog
time to other IP addresses.
Amount PING failures, after
this one of three events will be
happen: set (ON) output, set
(OFF) output reset (ON/OFF)
output on definite time (max
65535s).
Selecting this option forces the watchdog
off when in the Event Table occur off / on
the socket.
Upon his return to the previous state output
watchdog is started automatically.
(max 65535s).
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
21
www.tinycontrol.eu
I/O TABLE NUMBERS (soft 3.XX)
#define OUT0 (5)
#define OUT1 (6)
#define OUT2 (7)
#define OUT3 (8)
#define OUT4 (9)
#define OUT5 (10)
#define TEMP (11)
#define VCC (12)
#define INP1 (13)
#define INP2 (14)
#define INP3 (15)
#define INP4 (16)
#define INP5 (17)
#define INP6 (18)
#define INP7 (19)
#define INP8 (20)
#define INP9 (21)
#define INP10 (22)
#define INP11 (23)
#define DTH22_1 (24)
#define DTH22_2 (25)
#define DIFT (26)
#define I3XI5 (30)
#define PXT (31)
#define PINP4D (32)
#define PINP4D_24H (33)
#define INP1D (41)
#define INP2D (42)
#define INP3D (43)
#define INP4D (44)
Remote Control - working as a server (receiving packets and enables / disables the corresponding
output) or client (send packets to the server status change to INP1D or INP2D).
LK working as a server can be actuated from any number of clients, provided it is set to the
same password. Change in INP1D or INP2D low can switch outputs selected in the state of
„ON”, return to enter the high state output switches to „OFF”.
I/O TABLE NUMBERS (soft 2.XX)
#define OUT0 (5)
#define OUT1 (6)
#define OUT2 (7)
#define OUT3 (8)
#define OUT4 (9)
#define OUT5 (10)
#define TEMP (11)
#define VCC (12)
#define INP1 (13)
#define INP2 (14)
#define INP3 (15)
#define INP4 (16)
#define INP5 (17)
#define INP6 (18)
#define INP7 (19)
#define INP8 (20)
#define INP9 (21)
#define INP10 (22)
22
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
www.tinycontrol.eu
Reading XML data
Enter the IP address and the page name eg 192.168.1.100/st0.xml
The values of the sensors should be divided by 10
Control Panel:
- Dynamic data - st0.xml
- Static data - st2.xml
Events Config: s.xml
Scheduler: sch.xml
Network Config: board.xml
Working time: s_time.xml using the Timezone
Switching sockets http request
You can arm / switch set out without clicking on the buttons in the control panel, making
use of the following commands :
IP/outs.cgi?out=xxxxx – switches set the output to the opposite of the current
IP/outs.cgi?outx=x – disable or enable a specific output
when password authentication is enabled , the command of the following form :
user:password@IP/outs.cgi?out=xxxxx
user:password@IP/outs.cgi?outx=x
Examples:
192.168.1.100/outs.cgi?out=0 – changes the output state to the opposite out0
192.168.1.100/outs.cgi?out=2 – out2 output changes state to the opposite
192.168.1.100/outs.cgi?out=02 – changes the output state out0 and out2
 to the opposite
192.168.1.100/outs.cgi?out=01234 – changes the state of the outputs of out0 to out4
 the opposite
192.168.1.100/outs.cgi?out0=0 – turns out out0 ( ON state )
192.168.1.100/outs.cgi?out0=1 – turns out out0 ( OFF )
192.168.1.100/outs.cgi?out1=0 – turns out out1 ( ON state )
192.168.1.100/outs.cgi?out1=1 – turns out out1 ( OFF )
192.168.1.100/outs.cgi?out4=0 – turns out out4 ( ON state )
192.168.1.100/outs.cgi?out4=1 – turns out out4 ( OFF )
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
23
www.tinycontrol.eu
Managing PWM by HTTP GET:
change frequency:
http://192.168.1.100/ind.cgi?pwmf=9777 – setup frequency to 9777
change duty:
http://192.168.1.100/ind.cgi?pwmd=855 – setup duty to 85,5%
http://192.168.1.100/ind.cgi?pwm=1 – activates pwm output
http://192.168.1.100/ind.cgi?pwm=0 – off pwm output
http://192.168.1.100/ind.cgi?pwmd=990 – setup duty cycle pwm to 99%
http://192.168.1.100/ind.cgi?pwmf=5000 – setup 5 kHz frequency has all pwm outputs,
that is, PWM, PWM1, PWM2, PWM3
http://192.168.1.100/ind.cgi?pwm1=1 – activates pwm1 output
http://192.168.1.100/ind.cgi?pwm1=0 – off pwm1 output
http://192.168.1.100/ind.cgi?pwm2=1 – activates pwm2 output
http://192.168.1.100/ind.cgi?pwm2=0 – off pwm2 output
http://192.168.1.100/ind.cgi?pwm3=1 – activates pwm3 output
http://192.168.1.100/ind.cgi?pwm3=0 – off pwm3 output
http://192.168.1.100/ind.cgi?pwmd1=500 – setup duty cycle pwm1 to 50%
http://192.168.1.100/ind.cgi?pwmd2=990 – setup duty cycle pwm2 to 99%
http://192.168.1.100/ind.cgi?pwmd3=100 – setup duty cycle pwm3 to 10%
An accurate description of all the settings by POST / GET
for Even Config and the Scheduler is in a separate file
„POST / GET data description”
(downloadable from www.tinycontrol.eu)
24
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
www.tinycontrol.eu
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING.
#define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS.
#define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING.
#define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE.
#define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE.
#define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS.
#define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING.
#define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE.
#define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE.
#define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE.
#define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE.
#define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE.
#define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING.
#define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING.
#define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING.
#define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING.
#define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING.
#define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING.
#define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING.
#define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING.
#define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING.
#define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING.
#define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING.
#define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING.
#define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING.
#define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING.
#define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING.
#define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING.
#define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING.
#define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING.
#define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING.
#define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING.
#define INP1D (41) // iso.3.6.1.4.1.17095.10.1.0: READONLY BYTE.
#define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE.
#define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE.
#define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE.
NUMBERS OID for SNMP
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
25
www.tinycontrol.eu
Firmware Upgrade
In the event that there is a new version of the software or special version for application,
it is possible to load such software to the device. This can be done remotely over the network
using TFTP.
You my upgrade firmware on two way:
1. By dedicate software LAN Controler Tools.exe (find controler or put IP and click „Upgrade
Firmware”).
2. By any TFTP client, description below.
Send firmware file by TFTP, you have 5 second (Green LED on RJ45 socket blink) to start
send firmware when modul run after reset (you my casus reset by click button „Save config
and Reboot” in Network configuration or „Reset” button on board or dedicate software
„LAN Controler Tools”). If start transmision not happen that device start work normal.
If tftp transmision will start than wait about 90 second to finish upload firmware. After
upload device will be reset and start normal. If you want to upload upgrade file chose
„Save config and Reboot” in Network configuration or power OFF and power ON device .
The file must be send in binary mode eg. In Windows XP tftp client
tftp –i 192.168.1.100 put „file_upgrade.bin”.
After successful loading, the device will reboot and will be ready to go.
If you try to send the wrong file get an error message „invalid file”
Contents of the instructions is regularly checked and if necessary corrected. If the observations errors or
inaccuracies, please contact us. It can not be ruled out that, despite best efforts, however, some discrepancies
arose. To get the latest version, please contact us or distributors.
© Konsorcjum ATS Sp.J.
Copying, duplication, reproduction whole or in part
without the consent of the owner is prohibited.
26
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
www.tinycontrol.eu
NOTES
manual LAN Controller V2.0 – Firmware: HOME v. 3.13 and ISP v. 2.09 – LANKONT-002
27
www.tinycontrol.eu
NOTES
Konsorcjum ATS Sp.J.
ul. Żeromskiego 75, 26–600 Radom, POLAND
tel./fax: +48 48 383 00 30, e-mail: sales@ledats.pl
www.tinycontrol.eu, www.ledats.pl, www.wirelesslan.pl, www.ats.pl